Our Plans and Videos

Fuelless Power. Alternative Energy Devices

Shopping
Cart

Fuel-Less Generator and Motor

FREE ENERGY MOTORS & GENERATORS

PO Box 557
New Albany IN, 47151

Order by Phone: (812)945-5839

Or Order with our secure orderform

am writing in regards to Creative Science & Research. I would like to inform you that I am U.K based and one of the many happy people who have built an over unity working system, which has been powering my appliances. I am NOT an engineer, but I am good at making things, and most of what I have learned has been through this project with Creative Science!

 

 

I have a free energy system in place, and it is working for me!

 

 

.......................................................................................................................................................................

.......................................................................................................................................................................

Hello, I downloaded the fuelless engine plans and as you told me over the phone, I am not disappointed!  I want to go ahead and order the rest of your plans

 

 ( CD 1 package all 33 plans and 4 videos for $300.00 ) and would like to know how to do that while deducting the $70.00 as we discussed in our last e-mail. Also do you have an estimate of horsepower for the large motor in your plans? That would help me estimate size for projects. I'm thinking side by side 4 wheeler, speed controlled by the variable input voltage, not to mention power generation!

 

Thanks,

Allen - USA

 

 

 

The Fuelless Engine Model # 2  Free energy motor / generator

This is from a phone conversation Rick Gibson had with Alma Lorenzana Country of Guatemala - Aug 07 2013

 

Successfully built and tested your Fuelless Engine Model 2 motor. Me and my genius friend made a few changes and it works even better! I want to manufacture these down here in Guatemala ( Our answer to that was NO! You can not have permission to do that! ). His friend called us from the USA and said he just got back from Guatemala and seen the Fuelless Engine demonstrated! And this is some of the phone conversation Rick had with him.

 

" Rick I just came from my Guatemala where my friend Alma just showed me a demo of your motor! Wow! It was awesome. It was running lights and everything! He said we want to make them for the poor villages down in my country. I made a video of it and will send it to you soon. "

 

Alma Lorenzana  Country of: Guatemala

 

 

.......................................................................................................................................................................

Hi Rick

The plans I ordered down loaded with no problems at all, thanks! I have read them three times so far and am very happy with them! If it is at all possible could you tell me how to work out the HP of a motor/engine? I would like to build one of about 16 HP to drive a SP500 ( If it is in the plans and I have missed it, sorry )

 

Regards John ( Australia )

 

 

 As you can see our Fuelless Engine motor can also be made from 3/4" plywood.

 

Dear Sir,

 

I would like to confirm that I will receive my Fuelless machine back from the engineer on next Monday. It's running smoothly, but I did make a few changes. We are living proof that we have used your technologies to the fullest, we have managed to build your Fuelless Motor. I don't want to commercialize it of any sort, but I want to show children in our school how it works. Principals of magnetic forces. I'll be setting it up in the schools log cabin for demonstrations!

 

Adrian H.

Switzerland   August 2nd 2010

 

The Fuelless Engine:

 

Hi David,

 

I built the Fuelless Engine pancake motor and it is running great! I am getting about 2700 rpm's. I have started in total ignorance but the commitment remains. You have been in my prayers.

 

Donald H. USA

 

 

The Fuelless Heater:

 

Dear Dave,

 

I just wanted to inform you, I am amazed by your Fuelless Heater, Wow! It really works! I have been an mechanic for about 10 years and when I saw how much heat came from my small spaghetti can heater I was absolutely AMAZED!! I am building a Hybrid car and will build a bigger unit to heat it with. I am also going to build your Fuelless Engine.

 

Sonny S.  USA

.......................................................................................................................................................................

Fuelless Engine:

 

(This is Jesse's version of our fuelless engine)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hello Rick

This is Jesse, I built your small Fuelless Engine motor and it works great! It is running at about 1 horsepower. I am using a 22 pound coil with two 4 inch diameter neodymium magnets # N42's. I am getting one horsepower of energy with only 1 watt of power. It is so powerful there is no way to stop the motor by hand. I have a video of it running and will send it to you by E-mail.  Jesse D. TN USA


Jesse D TN USA

 

 

 

The Fuelless Engine Connected to a Car Alternator

Runs an Entire Home!

from Jerry S.  WV  USA     9-6-2005

 

Jerry:

 

Hello, this is Jerry Salmons, I want to order your #362 Fuel-less Engine plans, I ran into a man who works at Home Depot and he told me about you guys, He said he built 2 Fuel-less Engine motors from your plans and is running his entire home with them.  He said he is using the Fuel-less Motors to run high amp 12 volt car alternators and the car alternators are running and charging 12 volt car batteries or marine batteries,  The batteries are then connected to a inverter which steps up the voltage to 120V AC  to run his entire home! he is running all his lighting, appliances, TV and heating etc.

 

.......................................................................................................................................................................

Fuelless Heater!

 

I bought your CD Package #1, and have found it fascinating. I have built a prototype of the Fuelless Heater and found that it works as advertised. I am also working on the hydrogen electrolyzer. I am an aircraft mechanic an Inspector. I built the heater in our hangar and found there to be a lot of interest as onlookers passed by. It is not surprising after all; especially here in Minnesota. So the obvious question is, what is the patent status, and how can this technology be brought to more people? Especially the people who can't build them themselves.

 

I am wondering if you get dozens of emails like this. I hope so. However, I

recognize the seriousness of patent infringement, liability issues,

free-energy technology opposition, etc. I want to be on the up and up with

you. I believe that through the underground, so-to-speak, much can be

accomplished. I understand the importance of staying away from the media on

something like this, And educating all participants in the realities of this

world, which I am fairly well versed in.

 

Thank you and I hope to hear from you soon.

 

All the Best.

 

Peter D.   MN  USA

 

 

Homemade Solar Cells Jan 2010

 

Hey Rick,

I wanted to let you know that I have successfully screen printed my own solar cells. It took a little while to learn to do it just right, but now I can make as many solar cells as I like.

 

Thank You

Robert L.  USA

 

 

 

David,

 

I built your SP500 AC Generator and I am getting about 8,000 watts of power! WOW! I am using  # 18 SWG size magnet wire = 1.29mm.  In USA about # 16 AWG

 

Thanks

Larry F.  USA

 

 

 

 

.......................................................................................................................................................................

The Fuelless Engine Model # 2  Free energy motor / generator

This is from a phone conversation Rick Gibson had with Malcolm J. of PA USA - Jan 22 2015

 

Hey, Rick. I just wanted to let you know that I successfully built and duplicated your Youtube video experiment. The motor is running great and it stopped the house meter!  I am very satisfied with your device as well as the plans.

 

Paul T. State of Pennsylvania USA

 

.......................................................................................................................................................................

The Fuelless Engine Model # 2  Free energy motor / generatorE-mail sent to us by Mike B. Ohio USA - July 02 2014 Dear DavidI purchased your plans on 09/30/2013. I have built an operating motor, and it works fine! I made a minor change wiring the coils. I wired them in series and parallel. I separated the north south pole coils using jumpers. I am using a 5 amp variac and analog electric meter with a bridge rectifier for the power source. I am working on the generator section now. I read several negative comments( online ) and wanted to send a positive one. I will send you photo's later. ( When you have a true free energy motor that works, your going to have critics that do not understand what you are doing and have done, or they work for an oil company! CSR ) Mike B.. State of Ohio USA   

.......................................................................................................................................................................

The Fuelless Engine Model # 2  Free energy motor / generator

E-mail sent to us by: SAKASHITA -  JAPAN - May 22 2014

 

 

Dear Mr. Gibson

I received my order, thank you. I have now assembled it and....it moves!!!  Fantastic!! I was very impressed!!

 

Thanks for everything. Best wishes for your future.

God bless you!

 

Sakashita - Japan

 

 

The Fuelless Engine!  Self Running! 3,000 watt output!

This is from a phone conversation Rick Gibson had with Paul T. of LA USA - June 28 2010

 

Hello Rick

I have successfully built your large Fuelless Engine motor! It works great! It will run itself and a 3,000 watt windmill generator at the same time! See our SP500 Generator. I am using two 12V DC batteries. One to run the motor and the other to collect the free energy from the second cycle of the motor. When the first battery runs low to about 11.5V DC the batteries are then switched. The first battery is then recharged using the free energy from the motor. The second battery, which is now fully charged, is used to run the motor. This thing will keep on running and never stop!  I also have a 3,000 watt windmill generator connected to the shaft of the motor to recharge a battery bank. The battery bank powers my inverter to power my home during blackouts. We get a lot of bad weather down here, including hurricanes! I now want to build a larger motor to power my entire house 24 hours a day 7 days a week.

 

Paul T. State of Louisiana USA

 

 

 

.......................................................................................................................................................................

.......................................................................................................................................................................

Hello Rick,I'm sending you some pics with this e-mail so you can see what I have done with the info all of you have shared with the world. ( Please keep in mind that this is only a prototype and is not to pretty ). I thought I would start small and get it to run, then upscale it. I have to tell you this thing hauls butt!! When I run this motor using a 9V battery ( without a diode ), it super charges the battery in seconds (Free Energy)! To the point that the battery starts to expand! It runs flawless, and just with a flick of my wrist it starts!  This thing is awesome! cant wait to build a bigger one. This prototype fits in the palm of my hand! And when it runs, it is so fast it vibrates my hand. Thanks Fred S. North Carolina USA  

 

Customer Builds a Miniature Fuelless Engine Motor!

Letter sent to us by Fred of North Carolina USA - July 14 2011

 

 

The SP500 Generator!

 

Dear Mr. Gibson

We have successfully built the SP500 Generator by following your instructions and plans which we have modified to our needs. Firstly I would like to thank you very much for the sharing of the results of your dedication and work during so many years.

 

As I am visiting the USA between the 15th and the 29th of July 2011 and I would appreciate a conference call with you promptly followed by a meeting in your premises in order to maintain close collaboration relationships and agree on the conditions of using your technologies as part of our products as well as the supply of your existing and future products to us, specifying the economic and supply conditions (prices/donations per quantities and maximum production capacity, etc.).

I am committed to carry your solution to a massive success. I have done it with my team more than once. For an example, we have managed to change human´s habits of using mobile phones worldwide and became the worldwide leaders of Mobile SMS and VMS.

 

Samuel (Muki) SHOHAM

YIAMGAIA S.L.

Barcelona

 

.......................................................................................................................................................................

.......................................................................................................................................................................

.......................................................................................................................................................................

Rick thank you so much your reply.

It has taken me about 3 months to make the Fuelless Engine, I have made it after returning from office every night.Although I have made only the engine without the SP500 generator right now, the engine is running well. Next target is making the SP500.

 

Thank you so much giving me a very good plan.

 

Mr Lee  USA

 

 

 

.......................................................................................................................................................................

.......................................................................................................................................................................

The Fuelless Engine Model # 2  Free energy motor / generator

Jan 29 2015

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rick, instead of using carbon brushes to run my motor, I am using an electronic commutator. Which uses a solid state relay with a hall effect sensor. It works very well and is running very smoothly. This has also greatly raised the efficiency of the motor itself. Me and my son have been working on this together.

 

Khalid Al-S. Country of Oman

 

 

.......................................................................................................................................................................

.......................................................................................................................................................................

.......................................................................................................................................................................

.......................................................................................................................................................................

.......................................................................................................................................................................

.......................................................................................................................................................................

Free Energy Science Is For Everyone!

 

Dear Professor Waggoner

 

I read an article on the net a few years ago about water powered engines in America, I was a bit skeptical about it, but now I totally believe it is true!  Governments have been hiding the secrets of science from people for too long, especially Oil Companies. I applaud you for your work and for giving back to the people, Science should be for everyone!

 

Michael S.

3 Lansby court Riverton

6148

Australia

 

Tuesday March 23, 2004

 

 

 

 

 

.......................................................................................................................................................................

The Air Engine:

 

Dear David Waggoner.

 

The  plans downloaded and printed great!  Many thanks for the prompt service,  You must have known it was my birthday on Monday.

 

The Air Engine is up and running with no problems! I am running a 2 stroke engine, using just the cylinder piston and feeding the air through the plug hole, and it works a great!

 

In case I blow myself up, MERRY CHRISTMAS.

 

Yours Sincerely,

George E.   UK

 

 

 

 

.......................................................................................................................................................................

Fuelless Heater Plans:   July 31  2009

 

Hi Mr. Gibson

 

I purchased your Fuelless Heater plans a few years ago, and this spring I decided that I had to do something about it now. So since spring I have built a number of them in the R&D program. I started up the water - floor heater yesterday in the shop for drying lumber. Now the cement floor is up to speed, the unit runs approximately seven minutes, and is idle about 14 minutes. At our rate of hydro, it costs about 19 cents to run and I am using a 5 hp electric motor. It has no problem pushing the heat up to 158F degrees and is still climbing. I've got another Fuelless heater for the house trailer and want to directly heat the air.

 

A special thanks in making these plans available and at an affordable price.

 

Henry T.   Manitoba

 

 

 

 

 

.......................................................................................................................................................................

 

David,

 

Thank you so much for helping the kids with this project.

 

( Plans # 396 Homemade batteries for their sons Science Fair project )

 

Jenny P.     USA

 

 

 

 

 

.......................................................................................................................................................................

 

5 Color Screen Printing Press:

 

I built one of your 5 color T - shirt screen printing presses about 12 years ago. And my wife has printed thousands of T-shirts since then. Good plans, easy to follow. I thought I would pass this along to you.

 

Dave T.    CANADA

 

 

 

 

 

 

.......................................................................................................................................................................

 Coil Winder  ( Easy to build )

Photo sent in by a customer:

Ronan McDonagh   Ireland

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTICE: You do not need to build a coil winder. It can be done by hand or by using a drill press. Anyone can learn to build our Fuelless Engine motor and SP500 Generator. It is not that hard.

Easy to build coil winder using speed reducer from Grainger.com. Copper coated wire can be purchased hundreds of places on the internet.  We provide you the information on where to buy them in our plans.

 

 

 

 

 

Dear David Waggoner

 

Hi again,  this is Peggy Schleicher.  I am here in _______ visiting the folks and have ordered the HV electromagnet and homemade battery plans.

 

I have built the Fuelless Heater and it works great!  I am now getting the

parts together to make the 1 hp Fuelless motor. Just to let you know the capacitor specialists were trying to sell the $70.00ea computer grade 400v 470uf capacitors.  I explained that the motor

parts cost was to be around $150.00, he then came up with the required capacitors for $9.00 each.

 

Thanks again....Peggy

 

Peggy Myra S.  USA

 

 

 

 

 

 

 

 

CREATIVE SCIENCE & RESEARCH

P.O. Box 557

NEW ALBANY, IN 47151

USA

 

Phone Rick Gibson / Sales Dept: 1-812-945-5839

* Copyright 1996 - 2015 Creative Science & Research

All photo's as well as written copy can not be used without our written permission